MyDealer: Login | Register
D10x15 S3 Horizontal Directional Drill

D10x15 S3 Horizontal Directional Drill

D10x15 S3 Horizontal Directional Drill


With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.

Weight3265.9 kg

Fuel TypeDiesel

Power60 hp (44.7 kW)

Rotational Torque1500 ft-lb

Thrust/Pullback10000 lbs

Would you like to know more?

D10x15 S3 Horizontal Directional Drill Videos

Key features

The D10x15 S3 offers a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster.

  • An increase in carriage speed of almost 11% over its predecessor allows for faster cycle times and improved job site productivity.
  • Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.
  • A maximum ground drive speed (forward) of up to 5.3 km/hr with optional wireless remote makes it faster than the closest competitor — helping make job setup times, jobsite entry and job site departure go more quickly.
  • An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.
  • Reduced noise levels at the operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling easier communication among the crew.
  • A small footprint 10.2 cm narrower than its closest competitor — allows the drill to easily maneuver within narrow job sites and position side by side with a mix system on a trailer.


General Dimensions and Weights

Length (Minimum Transport) 153 inches 388.6 cm
Width (Minimum Transport) 44 inches 111.8 cm
Height (Minimum Transport) 66 inches 167.6 cm
Weight 7200 lbs 3265.9 kg
Angle of Approach 22 deg


Make and Model Deutz TD2.9
Fuel Type Ultra low sulfur diesel
Maximum Engine RPM 2300 rpm
Gross Horsepower 60 hp 44.7 kw
Aspiration Turbocharged
Max Fuel Consumption 3.5 gph 13.2 lph
Maximum Operating Angle (Fore/Aft)* 30
Maximum Operating Angle (Left/Right)* 30


Thrust 10000 lbs 44.5 kN
Pullback 10000 lbs 44.5 kN
Maximum Carriage Speed at Maximum Engine RPM 208 ft/min 63.4 m/min
Maximum Spindle Torque (High at Maximum Engine RPM) 1500 ft-lb 2033.7 Nm
Maximum Spindle Speed at Max Engine RPM 220 rpm
Minimum Bore Diameter 2.5 inches 6.4 cm
Maximum Ground Drive Speed at Maximum Engine RPM 3.3 mph 5.3 km/h
Noise Level at Operator's Ear 86 dB(A)
Guaranteed sound power (CE-rating) 103 dB(A)

Fluid Capacities

Fuel Tank 18 gal 68.1 L
Hydraulic System 25 gal 94.6 L

Drilling Fluid System

Maximum Flow 15 gpm 56.8 L/min
Maximum Pressure 1000 psi 68.9 bar
Brand FMC
On Board Tank Capacity 25 gal 94.6 L

Related Equipment