Whether it is site preparation or hauling heavy material, the CTX100 compact utility loader is up to the challenge. The CTX100 features vertical lift arms that offer exceptional lift and tipping capacities to efficiently transport materials on tough job sites.
Width91.4 cm (No Bucket)
Weight1542.2 kg (No Bucket)
Power40 hp (29.8 kW)
Capacity469.5 kg Rated Operating (SAE), 1341.7 kg Tipping
Customer NuLook Pools
Location ACT & in the surrounding areas of NSW
Equipment CTX100 Mini Skid Steer Loader
The mini skid steers making a splash
Mr Cullen from NuLook Pools recently purchased a Vermeer CTX100 Mini Skid Steer Loader, due to its exceptional lift and tipping capabilities to efficiently transport materials on tough jobsites.
The CTX100 is equipped with exceptional lift and tipping capacities to efficiently transport materials on tough jobsites.
Single joystick ground drive control offers a smooth range of motion without balancing the engagement of two separate controls. The handgrip enables the operator to maintain a secure grip while providing good joystick control.
Protective steel wings with cushioning increase operator comfort and support, providing a surface to brace against while working in uneven terrain.
The dedicated spring-cushioned operator platform keeps the operator out of the mud and debris
Equipped with a 40-hp (30kW) turbocharged Kohler KDI diesel engine. This engine meets emission compliance without the need for a Diesel Particulate Filter (DPF), reducing cost and complexity of the engine.
The integrated display provides the operator machine information such as engine hours, battery voltage and engine oil pressure.
A wide or narrow track configuration is available to meet your needs.
How narrow is this machine? Will it fit through a standard pedestrian gate?
The CTX100 Mini Loader comes with either a 9 inch or 7 inch track option. At it's narrowest configuration, with the 7 inch tracks and no attachment, it measures 91.4 cm wide and will fit through most standard residential side gates.
What hydraulic flow is available for attachments?
The CTX100 features a dual hydraulic system offering both high and low flow circuits. It is capable of providing 15.5 gpm (58.7 L/min) of hydraulic flow, which can power even the most demanding attachment. The low flow circuit offers 8.1 gpm (30.6 L/min) where maximum control is required.
What is the tipping capacity of the CTX100?
With a 79.4 kg operator, the tipping capacity of the CTX100 is 1341.7 kg and has a rated operating capacity of 469.5 kg.
Do I need a licence to operate this type of machine?
No. A short video on how to operate the common Vermeer mini loader controls can be viewed here.
What sort of daily maintenance does this machine require?
All daily maintenance tips are outlined in the Maintenance Manual and include:
Check engine oil & coolant levels
Check fuel level
Check hydraulic fluid
Check air cleaner
At the end of the day it is recommended to:
Fill fuel tanks
Grease the machine after it is shut down
Check tracks for rips & tears and track tension
What is the best way to transport this machine?
The best way to transport a mini loader is on a truck or trailer that meets the ADR and weight requirements for the load. See our contractor packages for some great examples that combine a trailer with a range of attachments.
Where can I take my Vermeer mini loader for maintenance or to purchase spare parts and consumables?
Vermeer Australia has dealerships locations with workshop and parts warehousing facilities in Townsville, Brisbane, Sydney, Melbourne and Adelaide that service the east coast of Australia and the Oceania region.