06 Oct SC362 Stump Cutter
Posted at 04:07h
in
SC362 Stump Cutter
Overview
With a 35 hp Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides operators with ample power and manoeuvrability.<br />
Width88.9 cm (minimum transport)
Weight598.7 kg
Fuel TypePetrol
Power35 hp (26.1 kW)
Capacity17" cutter wheel
Would you like to know more?
SC362 Stump Cutter Videos
Key features
- 35 hp (26.1 kW) Vanguard gasoline engine offers low vibration, low emissions and a limited three-year warranty.
- Move easily between stumps with the selectable two-speed ground drive.
- Vermeer AutoSweep® system (optional) monitors engine rpm and adjusts cutter wheel sweep rate.
- All of the belts are found on one side of the machine for convenient belt servicing.
Downloads
Specifications
General Dimensions and Weights
| Length | 110 inches | 279.4 cm |
| Height | 53 inches | 134.6 cm |
| Width (Without Duals) | 35 inches | 88.9 cm |
| Width (With Duals) | 49.8 inches | 126.5 cm |
| Height | 53 inches | 134.6 cm |
| Weight | 1320 lbs | 598.7 kg |
Engine
| Make and Model | Briggs & Stratton Vanguard | |
| Horsepower | 35 hp | 26.1 kw |
| Torque (Max.) | 53 ft-lb | 71.9 Nm |
| Fuel Tank Capacity | 6 gal | 22.7 L |
| Fuel Consumption (Max.) | 3.2 gph | 12.1 lph |
| Fuel Type | Petrol | |
| Air Cleaner | Dry-type safety element and restriction indicator | |
| Oil Filter | Spin-on | |
| Recommended Oil | 10W30 (See engine manual) | |
| Oil Volume with Filter | 2 qt | 1.9 L |
| Cooling Medium | Air | |
| Alternator | 20 amp | |
| Clutch Type | Electric clutch with brake |
Cutterwheel System
| Cutterwheel Diameter (Without Teeth) | 17 inches | 43.2 cm |
| Cutterwheel Thickness | 0.5 inch | 1.3 cm |
| Cutterwheel Speed | 1400 rpm | |
| Cutterwheel Straight Line Dimension | 47 inches | 119.4 cm |
| Cutterwheel Cut Above Ground | 24 inches | 61 cm |
| Cutterwheel Cut Below Ground | 15 inches | 38.1 cm |
| Tooth Description | Yellow Jacket™ Cutter System | |
| Number of Teeth | 16 | |
| Number of Indexes | 2 | |
| Number of Pockets | 16 | |
| Reversible Pockets | 16 | |
| Cutterwheel Guard | Standard | |
| Chip Containment | 7.7 cu ft | 0.2 cu m |
Cutterwheel Drive Components
| Belt Type | V-Belt | |
| Number of Primary Belts | 2 individual (matched pair) | |
| Jackshaft Dimension | 1.3 | |
| Jackshaft Bearing Type | Sealed ball | |
| Bearing Dimensions | 1.3 bore | |
| Number of Secondary Belts | 6 Banded | |
| Cutterwheel Shaft | 1.8 inches (4.8 cm) | |
| Bearing Dimensions - Secondary Belt | 1.8 inches (4.8 cm) double spherical roller pillow block |
Hydraulic System
| Tank capacity | 4 gal | 15.1 L |
| Recommended Oil Type | Vermeer HyPower 68 | |
| System Type | Open-loop series system | |
| Filtration Method | Pump suction strainer (100 mesh) and 6 micron return filter | |
| Pump Flow at Maximum RPM | 3.7 gpm | 14 L/min |
| System relief pressure | 2030 psi | 140 bar |
| Flow Control | AutoSweep® (option) or 2 speed ground drive | |
| Directional Control | Manual hydraulic value |
Electrical System
| System Voltage | 12 V | |
| Battery | 400 CCA | |
| Standard Gauges | Hourmeter | |
| Warning Lights | Operator presence status, clutch engage/disengagement status | |
| Switches | Two-speed ground drive, clutch engage/disengage, operator presence handles | |
| Controller | Vermeer ACS | |
| Shutdown System | Engine low oil pressure |
Chassis
| Frame Description | Welded tube and plate steel | |
| Control Station Description | Fixed side location | |
| Toolbox Description | Standard | |
| Steerable Axle Type | Hydraulic steering, oscillating axle | |
| Tires - Option One | 5.7 inches x 8 inches (14.5 x 20.3 cm) duals standard | |
| Fender Description | Yes | |
| Axle/Suspension | Rigid/Fixed (Rear) |
Ground Drive
| Low Speed Travel | 66 ft/min | 20.1 m/min | |
| High Speed Travel | 133 ft/min | 40.5 m/min |
