BC900XL Wood Chipper

Wood Chipper

Fuel Type: Petrol
Power: 35 hp (26.1 kW)
Capacity: 9″x 14″ infeed

Request a Quote

Find Nearest Branch Download Brochure

Features

Able to chip heavily branched material up to 9” in diameter and 14” (35.5 cm) wide, the BC900XL is ideal for line clearing and general clean-up needs.

Key Features

Provides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward/reverse feed positions mounts over the feed table, enabling the operator to stop the feed rollers and select forward or reverse operations.
A clutchless PTO system allows the cutter to be engaged without using a traditional slip clutch or idler pulley and without sliding the engine.
This machine offers direct access to all parts of the chipper for routine maintenance without climbing on or removing any shields. A dripless oil filter and five grease points are provided to reduce work effort and speed up service time.
Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.

General Dimensions and Weights

Length (Feed Table Up, Tongue In): 140.4 inches / 356.6 cm
Length (Table Down, Tongue Extended): 154.8 inches / 393.2 cm
Width: 79.5 inches / 201.9 cm
Height: 101.5 inches / 257.8 cm
Tongue Weight: 300 lbs / 136.1 kg

Engine

Make and Model: Briggs and Stratton Vanguard
Gross Horsepower (Maximum): 35 hp / 26.1 kW
Torque (Max): 53 ft-lb / 71.9 Nm
Fuel Tank Capacity: 15 gal / 56.8 L
Max Fuel Consumption: 3.2 gph / 12.1 lph
Fuel Type: Gasoline
Air Cleaner: Dry-type safety element and restriction indicator
Oil Filter: Spin-on
Recommended Oil: 10W30
Oil Volume with Filter: 2 qt / 1.9 L
Cooling Medium: Air
Alternator: 20 amp
Clutch Drive Engagement: Clutchless PTO

Feed System

Feed Roller Orientation: Horizontal
Number of Feed Rollers: 1
Feed Roller Clamp Load: 484 lbs / 219.5 kg
Feed Roller Clamp Type: Feed Roller Weight only
Feed Roller Dimension: 15.8 inches dia x 13.5 inches long / 40 cm x 34.3 cm
Number of Knives: 12
Weight of Feed Roller: 210 lbs / 95.3 kg
Motor Displacement: 33.1 CID
Motor Manufacturer: White
Feed Speed: 140 ft/min
Infeed Table Width: 48 inches / 121.9 cm
Infeed Table Length: 25 inches / 63.5 cm
Infeed Hopper Height: 32 inches / 81.3 cm
Infeed Throat Capacity: 9 inches / 23 cm
Pinch Point – Distance to End of Feed Table: 66 inches / 167.6 cm
Distance from Feed Table to Ground: 29 inches / 73.7 cm
Infeed Table material Thickness: 0.2 inch / 0.5 cm

Safety System

Bottom Feed Stop Bar: Standard
Bottom Feed Stop Bar Diameter: 2 inches / 5.1 cm
Bottom Feed Stop Bar Material Thickness: 11 GA
Actuation Force (BFSB): 34 lbs / 15,4 kg
Normal Sensitivity: 22 deg
Reduced Sensitivity: 12 deg
Reset Method: Dual green hold-to-run buttons
Four Position Feed Control Bar: Standard
Diameter: 2 inches / 5.1 cm
Material Thickness: 0.1 inch / 0.3 cm
Positions: Four positions: (E-Stop), Forward, Stop, (Reverse)
Actuation Force: 34 lbs / 15.4 kg
Green Hold to Run Button: Standard

Drum/Disc Cutting System

Material Capacity: 9 inches / 22.9 cm
Thickness: 1 inch / 2.5 cm
Diameter: 33 inches / 83.8 cm
Speed: 1400 rpm
Weight With Shaft: 330 lbs / 149.7 kg
Number of Knives: 2
Knife Thickness: 0.6 inch / 1.6 cm
Material: A8 Chipper Steel
Usable Edges: 2
Knife Size: 5 inches x 11.75 inches / 12.7 cm x 29.8 cm
Number of Bolts/Knife: 5
Replaceable Threaded Knife Block: Yes
Number of Paddles: 2
Fixture Method: Bolt-on
Air Flow: 933 cfm
Bedknife Size: 5 inches x 12.1 inches/(12.7 cm x 30.7 cm) hor; 5 inches x 8.8 inches/(12.7 cm x 22.4 cm) vertical
Bedknife Material: Grade 50
Bedknife – Number of Useable Edges: 2