Stump Cutter
- Width: 88.9 cm (minimum transport)
- Weight: 703.1 kg
- Fuel Type: Petrol
- Power: 25 hp (18.6 kw)
- Capacity: 16″ cutter wheel
Features
With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done.
Key Features
- An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines.
- AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
- The hydrostatic ground drive and hydraulic cutter wheel drive eliminates belts and pulleys reducing maintenance time and cost.
- Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
- See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
General Dimensions and Weights
- Length: 94 inches / 238.8 cm
- Width: 35 inches / 88.9 cm
- Height: 49 inches / 124.5 cm
- Weight: 1550 lbs / 703.1 kg
Engine
- Oil Filter: Spin-on
- Recommended Oil: Kohler oil or API CH4/SJ
- Oil Volume with Filter: 2 qt / 1.9 L
- Maximum Angle of Continuous Operation: 25 deg
- Cooling Medium: Air/oil
Cutterwheel System
- Cutterwheel Diameter without Teeth: 16 inches / 40.6 cm
- Cutterwheel Thickness: 0.5 inch / 1.3 cm
- Cutterwheel Speed: 1110 rpm
- Cutterwheel Straight Line Dimension: 35.5 inches / 90.2 cm
- Cutterwheel Cut Above Ground: 25 inches / 63.5 cm
- Cutterwheel Cut Below Ground: 12 inches / 30.5 cm
- Tooth Description: Yellow Jacket Cutter System
- Number of Teeth: 16
- Number of Indexes: 2
- Number of Pockets: 16
- Reversible Pockets: Yes
- Cutterwheel Guard: Yes
- Chip Containment: 2.2 cu ft / .1 cu m
Cutterwheel Drive Components
- Tank capacity: 9 gal / 34.1 L
- Recommended Oil Type: ISO 68
- System Type: Open loop
- Filtration Method: Inline return filter
- Pump Flow at Maximum RPM: 16 gpm / 60.6 L/min
- System relief pressure: 2750 psi / 189.6 bar
- Flow Control: Autosweep (option)
- Directional Control: Standard
- Oil Cooler: Yes. Fan-cooled
Electrical System
- Control Station Description: Fixed-rear
Track Drive System
- Track Width – Retracted: 35 inches (88.9 cm)
- Track Width – Extended: 35 inches (88.9 cm)
- Track Length on Ground: 31.4 inches (79.7 cm)
- Type of Idler: Cast
- Number of Idlers: 5
- Track Drive Pump Type: Hydrostatic
- System Relief Pressure: 2900 psi (200 bar)
- Pump Flow at Maximum RPM: 11.4 gpm (43.1 L/min)
- Track Drive Motor Type: Geroter
- Track Brake Type: Hydrostatic
- High Speed Travel: 3.2 mph / 5.1 km/h
- Ground Bearing Pressure – Soft Ground: 3.4 psi / 23.4 kPa